Self introduction

Anything that does not belong in the above categories.
Post Reply
Antxiko
Posts: 5
Joined: Thu Jun 09, 2022 2:23 pm

Self introduction

Post by Antxiko »

Hi everyone!

Recently I bought a Sharp MZ-80B from a flea market, I replaced the original PSU with a modern meanwell because the main transformer of the PSU was in short, so dead. I replaced the monitor board caps too and now works like a charm.

I can load BASIC from a WAV exporting it using MZFstudio and 80B specific setting. That works great (i´m using an old cassette card adaptor and the mobile phone) but I can´t get GALAXTICA working, it loads and the hangs, i´ll replace the cassete board caps too to see if it gets better.

Thanks!

Antxiko
User avatar
mz-80a
Posts: 342
Joined: Thu Jan 25, 2018 10:46 am
Location: Devon, UK
Contact:

Re: Self introduction

Post by mz-80a »

Welcome !! Hope you get Galaxtica working.
MZ-80A Secrets
https://mz-80a.com/

Sharpworks (Sharp MZ homebrew)
http://mz-sharpworks.co.uk/
Post Reply